WiseRail™ Deck Cable Railing
The new DeckWise® WiseRail™ stainless steel cable railing hardware fittings are not only designed for a sleek, beautiful look but for ease of installation as well. Our invisible hardware hides inside your end posts so there are no unsightly fastener ends.
Our cable rails are not only easy to install but can be used for both indoor and outdoor use and work with both wood and composite posts. We also offer pre-assembled, ready-to-install Cable Railing Kits for wood posts that are from 5′ – 50′. All kits include installation instructions. With are versatile design, our cable rail is easy to use not matter what size or shape your deck is.
You have a choice of: inside-of-post to inside-of-post, inside-of-post to outside-of-post, or outside-of-post to outside-of-post. Our kits allow you several different ways that you can run the cable on your deck. Each run will require a fitting that will act to tension your cable once installed.
Depending on the length of your run, the tensioning device in the kit, and whether you plan to bend the cable through a corner or end at the corner, you will either be able to use a non-tensioning push-lock or pull-lock on the other end or if you will need to use a push-lock tensioner instead.
Do it yourself cable railing kits come with stainless steel cable railing hardware fittings for both ends of your cable run, washers and the fasteners necessary, your choice of 1/8″ or 3/16″ diameter 1×19 Type 316 stainless steel cable and installation instructions.
You can order your cable railing kits in cable length increments of 5′ to 60′ lengths. You will cut the cables to their proper lengths on site, this ensures the perfect fit. Each kit contains one cable and all associated hardware. Other accessories, such as mounting tabs, cable cutters, etc. can be ordered separately.
**ALWAYS check your local codes before installation as your local code may vary.
WiseCable™ Estate Series
he WiseRail™ Estate Cable Railing – Outside Run for Wood Posts is for any type of wood post as an outside to outside fitting on a straight level run, on a pitch, or stairs. It can also be used for wood posts with composite sleeves having an outside diameter of 4-1/2″ or less. The tensioning device is a 3-1/2” long Invisiware Receiver, which installs through the wood post on one end. A Pull-Lock fitting is installed through the other end. Use a post protector tube (sold separately) to prevent the cable from carving grooves into your post or post sleeve where it exits at an angle. This is the most economical solution where the fittings are least visible.
- WiseCable ES-5′ Kit
- WiseCable ES-10′ Kit
- WiseCable ES-15′ Kit
- WiseCable ES-20′ Kit
- WiseCable ES-25′ Kit
- WiseCable ES-30′ Kit
- WiseCable ES-40′ Kit
- WiseCable ES-50′ Kit
- SS Cap for Estate Kit Tensioning End
Prices coming soon!
*All kits are sold for wood posts as straight runs or for stairs.
Features
- For wood posts or wood posts with composite sleeves having an outside diameter of 4-1/2” or less
- Outside to outside mount
- Budget friendly
- Made from corrosion resistant, high-strength type 316 stainless steel
- Tensioning device is a 3-1/2″ long invisiware receiver on one end and a pull-lock fitting on the other end. Both fittings are hidden in posts for no visible hardware between posts.
- Sleek and beautiful design
- Easily re-tensioned with an allen key when needed
- Kit includes (1) Pre-attached swagging stud, (1) invisiware receiver, (2) stainless steel washers, (1) pull-lock flitting with cap and 1/8″ 1×19 stainless steel cable
WiseCable™ Heritage Series
The WiseRail™ Heritage Cable Railing -Outside Mounts for Wood Posts is a budget-friendly cable railing for any type of wood post as an outside to outside fitting on a straight level run, on a pitch or stairs. The tensioning device is a 2-7/8” long threaded stud which installs on the back side of one end post. A Pull-Lock fitting is installed through the other end.
This through-the-post configuration is the only scenario in which the economical threaded stud kits may be used. The threaded stud kits are even more economical than the WiseCable Heritage Series, but the threaded studs are a basic, functional fitting, not a hide-in-the-post solution. A brass hex nut and some metal thread will extend beyond the back of the post on one end and can be covered by an end cap (purchased separately). A Pull-Lock fitting is installed through the other end.
Use the WiseCable Heritage Series for decks with dedicated end posts for each run where the posts are situated where the back sides of the posts are all accessible. This is both the most economical solution and where the fittings are least visible.
For wood posts on a pitch or stairs, install the WiseCable Heritage Series the same as on straight runs. The tensioning device is a 2-7/8” long threaded stud which installs on the back side of one end post. A Pull-Lock fitting is installed through the other end with a post protector tube (sold separately). The WiseCable Heritage Series can be used to go up a stair and across a landing by inserting post protector tubes in the break-over post. The tube will prevent the cable from carving a groove into your post where it exits at an angle.
*All kits are sold for wood posts as straight runs or for stairs.
Features
- For wood posts on a straight run, on a pitch or stairs
- Budget friendly
- Outside to outside mount
- Tensioning device is a 2-7/8″ long threaded stud on one end and a pull-lock system on the other end.
- Made from corrosion resistant, high-strength type 316 stainless steel
- Sleek and beautiful design
- Kit includes (1) 1/8″ diameter type 1×19 stainless steel cable with (1) pre-attached 7-1/2″ long threaded stud, (1) pull-lock fitting, with end cap (2) stainless steel washers, (2) stainless steel jam nuts
- End cap to cover hex nut is optional and can be purchased separately
WiseCable HS-5' Kit
$38.88
WiseCable HS-10' Kit
$43.21
WiseCable HS-15' Kit
$47.55
WiseCable HS-20' Kit
$51.77
WiseCable HS-25' Kit
$56.06
WiseCable HS-30' Kit
$62.28
WiseCable HS-40' Kit
$68.50
WiseCable HS-50' Kit
$77.54
WiseCable™ Legacy Series
WiseRail™ Legacy Cable Railing – Inside Run for Wood Posts has an Adjust-A-Body with hanger bolt tensioner allowing you to penetrate the screw directly into the inside of your wooden end post. The other end has a Push-Lock Fitting which requires no swagging or special tools. Drilling is minimal with the Legacy series with inside to inside mount.
Use the Legacy series for tight areas, 90 degree rail turns on the same post, or wall attachments. The pre-cut cable system can be easily trimmed to a finished dimension in the field.
*All kits are sold for wood posts as straight runs or for stairs.
Features
- For wood posts
- Inside-to-inside mount for tight areas or applying a 90 degree turn on the same plane on the same corner post
- Tensioning device is an Adjust-a-Body with hanger bolt on one end and a Push-lock Lag on the other end
- Made from corrosion resistant, high-strength type 316 stainless steel
- Minimal drilling
- Sleek and beautiful design
- Kit includes (1) adjust-a-body with hanger bolt, (1) pre-attached swagging ferrule, (1) locking nut, (1) push-lock lag, and 1/8″ 1×19 stainless steel cable
WiseCable LS-5' Kit
$60.97
WiseCable LS-10' Kit
$64.34
WiseCable LS-15' Kit
$67.72
WiseCable LS-20' Kit
$71.10
WiseCable LS-25' Kit
$56.06
WiseCable LS-30' Kit
$85.01
WiseCable LS-40' Kit
$95.00
WiseCable LS-50' Kit
$104.34
WiseCable™ Legacy Series Stair Kits
DeckWise WiseRail™ Cable Railing Legacy Series – Inside Run for Stairs is used for any type of wood post as an inside to inside fitting on a pitch or stair application. The tensioning device is an Adjust-a-Body which attaches via a mounting screw to the lag eye, threaded tab. A Push-Lock with Threaded Eye attaches the same way to the other end.
The WiseRail™ Legacy Series for Stairs can be used to go up a stair and across a landing by inserting post protector tubes in the break-over post (sold separately). The tube will prevent the cable from carving a groove into your post where it exits at an angle.
Great for tight areas, 90 degree rail turns on the same post, and can be mounted to walls, this inside to inside pre-cut cable system can be trimmed to a finished dimension in the field. No field swagging needed.
*All kits are sold for wood posts as straight runs or for stairs.
Features
- For stair or pitched runs with wood posts
- Inside to inside of post mount
- Tensioning device is an Adjust-a-Body with threaded eye which attaches via a mounting screw to the lag eye, threaded tab. A Push-lock with threaded eye attaches the same way to the other end
- Use with post protector tubes (sold separately) to prevent cable from carving a groove when angling
- Kit includes: (1) Adjust-A-Body with threaded eye, (1) pre-attached swagging ferrule, (1) lock nut, (1) push-lock threaded eye, (2) screws, and 1/8″ 1×19 stainless steel cable
WiseCable Stairs LSS-5' Kit
$69.25
WiseCable Stairs LSS-10' Kit
$71.34
WiseCable Stairs LSS-15' Kit
$73.43
WiseCable Stairs LSS -20' Kit
$76.76
Additional Helpful Accessories listed below
Additional Helpful Accessories - Sold Separately
DeckWise is more than willing to help with any questions you may have on their Cable Railing so once you have read the above info and you still have questions, please give them a call at 1-866-427-2547 and tell them you are working with us. You can rely on their application experts to recommend and provide you with the proper C.S.I specifications for the hardware and cable that is will be best for your job. They will ensure that your needs for appearance, low maintenance, corrosion protection, ease of field installation, along with a strong warranty are met and/or exceeded.