Smart Bit Pro Plug System Installation Guide
3 Easy Steps
Insert our Smart Bit Pro Plug Tool into your drill.
Drill where your want to install your screw and plug.
Drill until you can not go any further, your bit has an automatic stop on it.
Note: Make sure to use a sub-floor adhesive before installing your hardwood deck boards.
Attach your special glue applicator to your glue bottle. You want to use a glue made for exterior applications.
Squeeze glue into your pre-drilled hole.
Insert your hardwood plug into the pre-drilled hole.
If you cannot push plug in, use a rubber mallet to lightly pound your plug in.
Wipe away any excess glue before it dries.
Note: Plug should be flush but you can use an 80 grit sandpaper to sand your plug if necessary.