Premium Grade - Great Low Price!!!
- Premium Grade - Great Low Price!!!
- Ipe In Stock
Our Premium Grade Ipe is directly imported from Brazil and we can ship from one of our many warehouses around the country directly to your home or job site. We ship anywhere in the continental U.S. (no middle man), this keeps your Ipe decking prices from sky rocketing. We can also deliver to freight forwarders for shipments outside the U.S.
MUST SEE - amazing pics of an Ipe Deck towards the bottom of this page.
- "Select" = at least 80% clear wood (we call our "Select" - Premium Grade). Our Premium Grade averages 90% clear.
Ipé Decking Boards and Dimensional Lumber (scroll down for pricing).
Ipe consists of dark brown tones and is known as Brazilian Walnut. When the sun hits your new Ipe deck you might even see a reddish or a greenish tint in some of the boards.
Our Premium Brazilian Ipe Hardwood can be used for many applications due to the fact that it comes in various sizes and lengths and you can also take advantage of our custom mill shops to meet all of your building and project needs.
Ipe is the hardest of our Brazilian Hardwoods. It is approximately 3 times harder than Oak with an approximate 100 year life expectancy. Ipe is naturally resistant to bugs, mold, mildew and density due to it hardness (Janka Scale 3680). Once your Ipe decking materials are installed, you do not have to do anything to your new Ipe deck for it to last for years to come, but it will turn to a silvery-gray color if you do not apply a UV Finisher specifically made for Hardwood.
Ipe not only meets but exceeds the Americans with Disabilities Act requirements for slip resistance when wet so it is perfect for high traffic areas, decks, ramps, docks, piers or by your pool.
Certified Ipe and Kiln Dried Ipe are available - please call for information.
Wire Brushed - if you are looking for an unusable look for a wall or ceiling, we can wire brush your Ipe for a one of a kind unique look! Add $1.00 l.f.
Tips: Always use carbide tip tools (drill bits and saw blades). Always pre-drill your deck boards before installing any fasteners.
*** Please Note - Don't believe the hype:
Don't let companies "lure" you in with low prices on 1X6 Ipe and then do the old "bait and switch" to a higher priced product. 1X6 Ipe (3/4" X 5 1/2") has been used, tested and proven for decades. Please don't let anyone tell you that you have to go to a 21mm decking board. You are only talking approx. 1/16" of an inch (.076 of an inch) difference in the thickness (see picture below). Ipe 1X6 has been tested, tried and true for many, many years! We can get 21mm Ipe, but why pay more for it? Don't let low online prices for 1X6 then a "bait and switch" to 21mm (for more money) fool you.
Ipé Decking - why pay for 21mm when you don't need to....
**IMPORTANT - Please be aware that on some websites with online ordering, their linear foot price goes up with the length that your click on while ordering, so it is NOT the linear foot price that you first see and think you are paying.**
We prefer to speak with you about your needs and to see how we can help save you money and we give you a written quote so you know exactly what you are getting and how much you are paying for it.
This is all Premium Grade Ipe. Please let us know if you need specific lengths, we can provide specified lengths. If you are going to cut your boards into short lengths, we can save you money, 3' - 7' are less and you can specify what length you need!
*NOTE: Please keep in mind if you want/need all one length - (Ex: all 12' or 16' and longer lengths), the warehouse may have an up-charge (not always) depending on the current inventory.
- Grooved add .40 l.f. T&G add .50 l.f.
- We can also grooved one side only for the edges of your deck.
Important: Please email or call us for a custom quote and call to place your order. We do not use online ordering, by speaking with you, we can ensure that you are getting exactly what you need and we may be able to help you save money on the lengths that you want.
Ipe 1X6 – In Stock (3/4” X 5 ½”) -- Premium Grade 1X6 is for joists that are either 12” or 16” on Center
6'-14' R/L = 7.25l.f.
8' - 15' = $7.40l.f.
16'-20' = $7.60 l.f.
3' or 4' = $3.80 l.f.
5' or 6' = $3.90 l.f.
7' = $4.10 l.f.
Ipe 5/4X6 – In Stock (1” X 5 ½”) -- Premium Grade 5/4X6 is for joists that are either 12”, 16” or 24” on Center
6'-14' R/L = $8.60.f.
8' - 15' = $8.80 l.f.
16'-20' = $9.00 l.f.
3' or 4' = $5.04 l.f.
5' or 6' = $5.24 l.f.
7' = $5.44 l.f.
Ipé 1X4 (3/4" X 3 1/2")
- Grooved add .40 l.f. -- T&G add .50 l.f.
- We can also grooved one side only for the edges of your deck.
8' - 15' - $3.60 l.f.
16' - 20' - $3.80 l.f.
Ipé 5/4X4 (1" X 3 1/2") - Please call for pricing.
- Grooved add .40 l.f. -- T&G add .50 l.f.
We can also grooved one side only for the edges of your deck.
8' - 15' - Please call for pricing.
16' - 20' - Please call for pricing.
Ipé Dimensional Lumber
1X8 (3/4 X 7 1/4) = $9.25
1X10 (3/4 X 9 1/4) = $11.50
1X12 (3/4 X 11 1/4) = $13.20
5/4X8 (1 X 7 1/4) = $10.50
5/4X10 (1 X 9 1/4) = $15.00
5/4X12 (1 X 11 1/4) = $17.20
2X2 (1 1/2 X 1 1/2) = $3.05
2X4 (1 1/2 X 3 1/2) = $6.89
2X6 (1 1/2 X 5 1/2) = $13.57
2X8 (1 1/2 X 7 1/4) = $16.70
2X10 (1 1/2 X 9 1/4) = $21.20
2X12 (1 1/2 X 11 1/4) = $24.20
3X6 (2 1/2 X 5 1/2) =$24.50
3X8 (2 1/2 X 7 1/4) = $29.50
3X10 (2 1/2 X 9 1/4) = $37.15
3X12 (2 1/2 X 11 1/4) = $45.70
4X4 (3 1/2 X 3 1/2) = $18.50
4X6 (3 1/2 X 5 1/2) =$31.25
4X8 (3 1/2 X 7 1/4) = $40.70
4X10 (3 1/2 X 9 1/4) = $51.40
4X12 (3 1/2 X 11 1/4) = $62.20
6X6 (5 1/2 X 5 1/2) = $51.95 l.f.
8X8 (7 1/4 X 7 1/4) = $130.00 l.f. -- In Stock
- If you don't see the size/price you need, please ask, we do have other sizes available (3X8, etc.).
- For any sizes not listed, please contact us for availability and a custom quote.
4X4 (3 1/2 X 3 1/2) $18.50 l.f.
6X6 (5 1/2 X 5 1/2) $51.95 l.f.
8X8 (7 1/4 X 7 1/4) $130.00 l.f.
You can specify the lengths that you need....
We have no hidden costs, so we want to let you know.......
- 1. If you do need all 12' or all 16' lengths. It depends on current inventory if there will be an extra charge or not.
- 2. The only other possible charge (not always) could be if you need A LOT of the same length, it depends on inventory at the time of order (i.e.--300--20' boards or 400--12' etc.). If inventory for the length you need is not an issue, there will be no extra cost to you.
Random Lengths are 6'-14, if you need different lengths for your random lengths, please ask. You can specify lengths.
Ipé Decking Boards
- If you need a large commercial Ipe deck lumber quote, please contact us for pricing. Large Quantity discounts may apply.
Prices above are for S4S and E4E Premium Grade Decking Boards. Random Length orders are 6'-14' lengths. Grooved both sides, Grooved one side only, Tongue & Groove, Siding and Soffit are available. (T&G are for covered areas only).
For Grooved Boards add .40¢ linear foot and for T&G add .50¢ linear foot. Siding and Soffit quoted per job.
S4S E4E Boards
All boards are S4S (smooth 4 sides) and E4E (eased 4 edges) unless otherwise specified.
Your wood can be grooved on both sides for your Ipe Clips or just one side only to give the edge of your deck a clean finished look (due your board not being grooved on the outside edge). Add .40 l.f.
Tongue & Groove Boards (covered areas or ceilings only)
Tongue and Groove Boards are available in both 4" and 6" widths and are great for covered decks and patios. Add .50 l.f.
Ipé Handrail Material
- 2X6 Handrail (1 1/2 X 5 1/4) Call for a custom quote.
- 2X4 Handrail (1 1/2 X 3 1/4) Call for a custom quote.
- 1X4 Subrail (3/4 X 3 1/2 with 1 1/2" plow in the bottom).
- Pricing above for 2X2 and 2X4:
- 2X2 Balusters (1 1/2 X 1 1/2)
- 2X4 Bottom Rail (1 1/2 X 3 1/2)
Tip: Fasten bottom rail and subrail to balusters, then screw up through your subrail into your handrail and no fasteners will show.
If you want cable railing for your new deck
Post wraps, post skirts, and post caps are listed below
If you have ever had trouble leveling the posts on your deck, here is the answer! This great new product will help you level your post quickly and easily!
Only $6.95 each plus Shipping.
Ozco Post Connectors
Easy and attractive way to fasten your posts to your deck.
Hidden Clip Decking
Hidden Clip Decking takes grooved decking to the next level. The clips are still there but they cannot be seen, it is like the groove between the boards and the clips vanish right before your eyes!
Hidden Clip Decking is grooved decking with an extra profile so that you do not even see the hidden fasteners but it still lets water and debris flow through!
It is the perfect profile for a very clean, modern look.
Please keep in mind that the Hidden Clip Profile has to made from 5/4 material due to the profile.
5/4X4 Ipé Decking-3" Face
Ipé Clip Extreme 4 is used with your Hidden Clip Decking as it gives the optimum spacing for this profile.
To figure your linear footage multiply your square footage by 4.
5/4X6 Ipé Decking-5" Face---6'-14' R/L
5/4X6 Ipé Decking-5" Face---8'-14'
5/4X6 Ipé Decking-5" Face---16'-20'
Ipé Clip Extreme 4 is used with your Hidden Clip Decking as it gives the optimum spacing for this profile. To figure your linear footage multiply your square footage by 2.4.
Water and small debris still drain through but you do not see the clips! This is the perfect solution for modern decks or when you just want a "cleaner look". Now you see the clips, now you don't! They vanish right before your eyes!!!
Please let us know if you need any Joist Tape or Ledger Wrap
Ledger Tape can be used for the ledger board against your house or for posts being stalled in the ground.
Ipe Post Caps $25.00 each (any size listed below)
These post caps are milled from Ipé.
- 4X4--Cap size is: 5 1/2" X 5 1/2" X 1 1/2" High
- 6X6--Cap size is: 7 1/4" X 7 1/4" X 1 1/2" High
- 8X8 --Cap size is: 9 1/4" X 9 1/4" X 1 1/2" High
8X8 cap has a 3 week lead time, they are custom milled per order.
These caps sit on top of your posts, they do not slide down over your post. They can be attached with either a sub-floor adhesive or screws and plugs.
New Ipé 1X6 Post Wraps-Available Now!!!
They can also be milled in 5/4X6 Cumaru
Please Note: These Post Wraps are NOT assembled so they can fit around existing posts or can used with new installs.
These post wraps can be made from Ipe and are great to cover an existing post or just to give your existing post a "heftier" look and can also hide low voltage wiring for lighting.
- They are decorative with 2 grooves down each side to not only hide the seams but to give your new post covers a design to them. They fit together like puzzle pieces so you don't have to worry about unsightly seams and they are load bearing and meet code!!!
- Ipe Post Wrap - 4X4 post- 4' long -- Call for a custom Quote.
- Ipe Post Wrap - 6X6 post -4' long -- Call for a custom Quote.
Available in other sizes and lengths. Other sizes and lengths would be custom milled so please call for a quote. Also available in other species, please ask.
What a great idea, this carpenter installed the Ipe Post wraps and then used the posts skirts on both the top and bottom of the wrap, then installed the post cap. What a balanced, finished look!
Ipé Post Skirts
What a great new way to give your post a finished look or to hide any hardware used to install your posts. You can also invert them and use them on the top of your post (under your post cap) to give your post a balanced look, even more finished look!
Note: Make sure to order post caps that are large enough to cover the post skirt when inverted.
Sold per 24" Piece, NOT assembled $11.92 per 24" piece.
Longer lengths available, please call for details/pricing.
20" for 4" X 4" Posts
28" for 6" X 6" Posts
Great New Fascia Ideas:
This is becoming very popular! Instead of using a 12" (11 1/4") wide board for fascia, now you can use narrow boards. Narrower boards will not tend to cup like the 12' wide boards. This not only gives you an all new look but adds dimension to your fascia as well. This opens up a whole new world for the species that are not available in the wider boards such as Cumaru and Garapa!
Here are some ideas, you can use 2 species for a two tone look, stain part of it, paint it, the possibilities are endless! Click on picture to enlarge it.
Pictures below are courtesy of Charles Gallager - 631-513-7095. Charles installs decks on the West Coast of Florida and in The Hampton's, Long Island, NY.
All Ipe (for Decks and Fencing), Cypress (for Joists) and Mesh Fencing were provided by Finest Brazilian Decking.
Completed Deck and Privacy Fence
Completed Deck around Pool
Deck almost completed with Mesh Fence
Outside view of Mesh Fencing
Privacy Fence with Gate
Privacy Fence with Gate Open
Outside of Privacy Fence with Gate
Privacy Wall with Gate
Please contact us for pricing and availability on Kiln Dried Ipe. Great for indoor projects and dryer climates.
Multiple Warehouses ~ Shipping Nationwide ~ Low Prices ~ Direct Importer ~ No Middleman
The gorgeous tones and shades in Ipe is what makes every Ipe deck even more beautiful and unique than the next. Ipe creates a look like no other. Every Ipe deck is unique due to these beautiful hues.
Hardwood Decks are beautiful even once they turn gray
If you want a beautiful, long lasting deck without having to put a finisher on it, Brazilian Hardwood Decks are the perfect choice!
Grayed Brazilian Hardwoods also look beautiful on Coastal Homes and homes that the gray color would enhance the look of.
Never pressure wash your deck, always use a garden hose. Even though the Brazilian Hardwoods are extremely hard and dense, pressure washing can damage your wood and/or raise the grain. (If you have to use a pressure washer, make SURE it is on the lowest possible setting).
Please call for availability.
This Ipe didn't make our cut for Premium Ipe, so we re-mill it to remove as much as possible of the natural characteristics in the wood, such as knotholes. The result is a less expensive Ipe called Secondary Ipe which may have small knot holes or imperfections but it does not affect the integrity of the wood and is is milled to S4S and E4E. This Ipe is perfect for fences or decks when you are looking to save a little on your latest project.
Custom milling is available